Deploying HP SIM 5.x on MSCS clusters on Windows 2008 with SQL Server 2005 536992-001, 02/2009

50
Figure
40
:
HP SIM 5.x home page
Note:
Navigate to
Options

Discovery
. Select
System Automatic Discovery
task and click
Edit
. The
Edit Discovery
page appears. Take a look at the
Ping inclusion ranges
list box (on the l
eft side of
the right frame, near the bottom of the screen). Note that HP SIM 5.x automatically generates a
range for each of the IP addresses the current system has. Because one of these ranges is based
on the cluster heartbeat IP address (generally of th
e form 10.0.0.1), that range would not be of
any use, and you should remove it from the list in order to prevent future confusion. Be sure to click
OK
.
IMPORTANT:
Navigate to the
Options

Protocol Settings

WMI Mapper Proxy. Check the Host
list
and ensure th
at the cluster virtual name is used instead of any of the system names (delete the
system name, if it is used, and add the cluster virtual name).
8.
Return to the Cluster Administrator.
9.
Repeat steps 2 through 6 in the
Error! Reference source not found.
using the other system.
Note
:
These steps are to ensure HPSIM is working after failover.
10.
You should be able to use the active system name to establish a command
-
line session to the
cluster HP Systems Insight Manager service from a client syste
m that has an
OpenSSH
client
installed, using SSH.
Note:
The only exception is when the disk group containing the HP SIM program files (HP SIM
Disk Group in this paper) has failed
-
over to the other system. In this case, a failing message
indicating
WARNIN
G: REMOTE HOST IDENTIFICATION HAS CHANGED
appears. When that
happens, simply use the name of the other system instead.