HP System Insight Manager with HP Command View EVA

White paper | HP Systems Insight Manager

29 | March 2013

</interopnamespacelist>

</port>

</interopnamespacelist>

</port>

</wbemportlist>

3. Save the changes.

4. Restart the HP SIM service.

Correcting an existing HP SIM installation

Important: Do not use the following procedure if this is a first-time installation of HP SIM. Use this

procedure only if HP SIM has already been installed and the WMI Mapper port has been changed to

something (for example, 6989) other than the default (5989).

To restore the WMI Mapper port to the default port:

1. Stop the Pegasus WMI Mapper service.

2. Open the following file:

C:\Program Files\The Open Group\WMI Mapper\cimserver_planned.conf

3. In the line that includes httpsPort=6989, change the port number to 5989.

The port number may have already been set to something other than 6989; it is used here as

an example only.

4. Save the file.

5. Restart the Pegasus WMI Mapper service.

6. Execute the netstat command, and verify that the change has been made.

Note: The changes made in the cimserver_planned.conf file will be applied to the

cimserver_current.conf file after the service is restarted.

An example of a cimserver_planned.conf file follows:

enableRemotePrivilegedUserAccess=true

enableHttpsConnection=true

enableHttpConnection=false

sslCertificateFilePath=C:\hp\sslshare\cert.pem

sslKeyFilePath=C:\hp\sslshare\file.pem

httpsPort=5989