Installing and configuring HP Integrity VM for HP Systems Insight Manager 5.x

Introduction
This paper will explain the procedure to install and configure HP Integrity Virtual Machine for HP
Systems Insight Manager on BL60P. The virtual machine environment consists of:
• VM Host
• Virtual Machines (also known as Guest)
The VM Host virtualizes the CPU, Memory and any input/output devices, enabling you to allocate
resources. The Virtual Machines are abstraction of real, physical machines. They are fully loaded,
operational systems, complete with operating systems, management utilities, applications and
network, running in a virtual environment.
HP SIM can help manage HP Integrity Virtual Machines and associate the Virtual Machines with the
VM Host.
Note: On the BL60P, make sure the USB DVD player is connected to USB01, prior to installing the
operating system. This allows the drivers to be installed correctly and identify the USB DVD player.
Requirement
This paper assumes the user will have knowledge on HP-UX 11.11, 11.23 and the ability to install
software from a depot file.
Software
• HP-UX 11.23 v2 May 2005 or later operating environment
• PRM SW Libraries (B697BA)
• Integrity Virtual Machine (integrity_vm.depot)
• HP-UX software patches: PHKL_32518, PHKL_33052
• HP SIM 5.1 or later
Hardware
• Integrity Server
• 2GB Memory Minimum
• 17GB per VM
Installing and configuring HPVM
Installing
Install the PRM and the Integrity VM software into a depot directory, then install as follows:
# swinstall -x autoreboot=true -s /path-to-depot-file B7697BA T2801AA
To verify that Intergrity VM installed successfully enter the following command:
# hpvminfo
hpvminfo: Running on HPVM host.