Deploying HP SIM 6.x on MSCS clusters on Windows 2008 with SQL Server 2008 SP1 White Paper

Figure 56: The HP SIM 6.x home page

Note:

Navigate to

Options



Discovery

. Select

System Automatic Discovery

task

and click

Edit

. The

Edit D

iscovery

page appears. Take a look at the

Ping

inclusion ranges

list box (on the left side of the right frame, near the bottom

of the screen). Note that HP SIM 6.x automatically generates a range for

each of the IP addresses the current system has. Because

one of these

ranges is based on the cluster heartbeat IP address (generally of the form

10.0.0.1), that range would not be of any use, and you should remove it

from the list in order to prevent future confusion. Be sure to click

Important:

Navigate to

the

Options



Protocol Settings



WMI Mapper Proxy. Check the

Host

list and ensure that the cluster virtual name is used instead of any of

the system names (delete the system name, if it is used, and add the cluster

virtual name).

Return to the Cluster Admin

istrator.

Repeat steps 2 through 6 in the

Validating the installation

using the other system.