HP Systems Insight Manager 6.0 Command Line Interface Guide
If no options are entered, the configuration status is listed ( -l ).
WhenHP SIMis running, you can use -l to list the configuration status, but you cannot run mxinitconfig
-a or mxinitconfig -r.
• mxinitconfig -a
This command performs the initial configuration procedure. The following steps are performed during
the initial configuration:
• The initialization file and property file are set up.
• The database is configured.
• The server daemons are started.
• The local system is configured to allow management by the server.
• mxinitconfig -r
This command removes the HP SIM configuration information. The following steps are performed:
• The server daemons are stopped.
• The authentication keys are removed.
• The database is unconfigured.
• mxinitconfig -l
This command lists the current configuration status.
Options
-a
Configure the server.
-r
Unconfigure the server
-l
List the current configuration status.
Return values
MeaningValue
Successful completion.0
An error occurred during operation.>0
Files
HP-UX and Linux operating systems
• /var/opt/mx/logs/initconfig.log
• /etc/opt/mx/config/initconfig.properties
Windows operating systems
• \HP SIM directory\logs\initconfig.log
• \HP SIM directory\config\initconfig.properties
Examples
Example 1
To configure the server, enter mxinitconfig -a.
44 Command descriptions