README - HP Systems Insight Manager 5.3 with Update 1
When the iLO 2 credentials are removed from the Insight Power Manager options page, Insight Power
Manager continues to successfully collect history data from servers. The iLO 2 credentials on the Insight
Power Manager options page are default credentials. After good credentials are found, they are associated
with the system and the defaults are no longer used.
-------------------------------------------------------------
After an Insight Power Manager license is applied to a server and you navigate to the graph screen, it
displays Data Collection Status: System is not licensed for Insight Power Manager.
The Data Collection Status indicates the status of the last command issued to the managed system. If you
have applied a license after the last command was attempted, it is still the most recent status as no new
command has been issued to the managed system.
-------------------------------------------------------------
After applying an iLO Select or Advanced license to the iLO 2 using its user interface, Refresh Data is
clicked in Insight Power Manager to collect new power history data and a message appears indicating the
iLO 2 has no license. HP SIM must re-identify the iLO 2 to detect the presence of the new license. Select
Tools→Identify Systems to re-identify the iLO 2 or wait for HP SIM's periodic identification cycle to
complete. You can check the status of HP SIM's awareness of iLO 2 license assignment selecting
Deploy→License Manager.
-------------------------------------------------------------
The temperature graph is blank or is not accessible when displaying power data for an ML370 G5 server.
The ML370 G5 server has no ambient inlet temperature sensor. Prior to collecting data from this server, the
temperature graph is empty. After data has been collected, the temperature graph is inaccessible when
navigating to Insight Power Manager.
-------------------------------------------------------------
When a 24-hour graph displays that has less than 24 hours of history data in it, the Kilowatt-Hour analysis
calculation appears to be wrong. The Kilowatt-Hour analysis data covers only available collected history
data. If some history data is unavailable, zeros are not assumed. Missing data does not mean zero values.
HP Serviceguard Manager
There are two ways to launch HP Serviceguard Manager in the in the All Systems collections assuming
Serviceguard Manager is already registered with HP SIM.
• If you click on a cluster node "C" on a row that states something like Member in cluster C in the All
Systems collection.
• If the user clicks on a cluster node "C" on the row where it is just listing a cluster "C" in both in the All
Systems collection.
Where "C" is the name of the cluster node.
Scenarios when you can or cannot launch Serviceguard Manager:
• If HP SIM did not associate a management processor to Serviceguard Manager members, you can
launch Serviceguard Manager successfully by the two methods describe above.
• If HP SIM did associate a management processor to Serviceguard Manager members, only method
one is able to launch Serviceguard Manager.
• If HP SIM did associate a management processor to Serviceguard Manager members, using method
two will not launch Serviceguard Manager.
-------------------------------------------------------------
The HP Serviceguard WBEM provider requires root credentials to access. Therefore, if you have a
Serviceguard cluster that is not configured for SNMP and/or not using the SNMP Serviceguard provider,
then you must use root WBEM credentials to all the nodes in the Serviceguard cluster.
-------------------------------------------------------------
HP Serviceguard Manager 4.0 is not supported on Windows Server 2003.
-------------------------------------------------------------
24 Known Issues and Workarounds