README - HP Systems Insight Manager 5.3 with Update 1

This system doesn´t have a server CIMOM installed locally, or cannot connect
to it using all credentials specified
Running WBEM rules based identification.
Cannot get ComputerSystem WBEM/WMI data from the system
Running VM Identification
The system is not a VMware ESX Host, or WBEM credentials may not be
specified, skipping VM Identification
Running WS-Man identification.
The system did not respond to WS-Management, verify credentials.
Checking for SNMP support on system.
The system responded to a SNMP request, it supports SNMP.
Running SNMP base Cluster identification using common cluster MIB.
This was not a system with the common cluster MIBs supported.
Running HP ProLiant management agent identification
System has the SNMP ProLiant server (foundation) agents installed, adding
system type.
Running HP NetServer identification.
System supports the NetServer SNMP agent, adding system type
Running HP-UX SNMP identification.
System does not have the HPUX SNMP agents installed.
Running SNMP System Type Manager identification.
Found matching SNMP System Type Manager rule, added as possible system type
Checking for DMI protocol support.
The Windows CMS cannot communicate with HP-UX or other DMI, skipping.
Running DMI System Type Manager identification.
The system does not have Windows DMI support.
Running HP-UX DMI identification.
The system does not have HP-UX DMI support.
Running HP/Compaq Desktop identification.
The system does not have Windows DMI support.
Running HP DMI Desktop identification.
The system does not have HP DMI Desktop support.
Running Generic DMI identification.
The system does not have Generic DMI support.
Checking for SSH protocol support.
The system supports SSH protocol
Running Storage identification.
There were no storage profiles found on this system.
Storage identification completed.
Running HP Service Guard Identification.
The system is not part of HP Service Guard cluster
Checking if this system is supported by Insight Power Manager.
Insight Power Manager is supported.
Running VM identification.
The system is a Virtual Machine Host
Building system relationships.
Running limited data collection for common attribute.
[WBEM] System identified as WBEM instrumented but no usable WBEM credentials
available. Check configuration and rerun Identification.
Root Cause: Identification failed to generate relevant WBEM credentials
for target system.
Corrective Action: Check network and configuration of target system. Check
the following pages to ensure appropriate WBEM credentials and port number
data are provided: Global Protocol Settings, System Protocol Settings.
Rerun Identification and Data Collection.
The SSH is not configured on this system
The system does not have SMH or SSO support.
Identification 27