HP Systems Insight Manager 5.3 with Update 1 Installation and Configuration Guide for Linux HP Part Number: 418811-005 Published: April 2009 Edition: 5.3.1

3. Click on the New button. The Add WMI Mapper Proxy page appears.
4. Enter the IP address or the host name in the Host: field where OpenPegasus WMI Mapper is installed,
and enter the port number where the WMI Mapper is installed in the Port number field.
5. After identification is complete, be sure the Properties Page link on the System Page for the WMI
Mapper node is there, and click on the link to bring up the Properties page.
In order for HP SIM to manage Windows systems, the WMI Mapper as Proxy must be configured and
correctly identified using the above steps.
52 Configuring HP SIM using the Options menu