HP Systems Insight Manager 6.3 Installation and Configuration Guide for HP-UX

3 Setting up managed systems
Perform step 2 to install and configure the required management software.
1. Install and configure the CMS. The procedure to complete this step is in the installation chapter
of this guide. For details, see “Installing HP Systems Insight Manager on the CMS for the first
time” (page 20).
2. Install and configure the required management software on the systems that will be managed
by the CMS. The procedure to complete this step is in this chapter.
3. Configure Systems Insight Manager for your environment. For more information, see
“Configuring Systems Insight Manager” (page 28).
Setting up managed systems involves installing the required management software. The management
software being installed depends on the type of managed system.
• HP-UX
• Storage systems
• Windows systems see the HP Systems Insight Manager 6.3 Installation and Configuration
Guide for Windows (http://h18013.www1.hp.com/products/servers/management/hpsim/
infolibrary.html)
• Linux - see the HP Systems Insight Manager 6.3 Installation and Configuration Guide for Linux
(http://h18013.www1.hp.com/products/servers/management/hpsim/infolibrary.html)
Installing the required software on an HP-UX system
Procedure 4 Basic managed system software for HP-UX
1. For HP-UX, the following software, shown with minimum recommended versions, is required
for essential Systems Insight Manager functionality to operate. This software is installed by
default as part of the latest HP-UX 11i v2 or HP-UX 11i v3 operating environments, but it might
need to be installed or updated on older HP-UX 11i v2 systems.
• T1471AA HP-UX Secure Shell
• OpenSSL
• HP WBEM Services for HP-UX
This WBEM Services bundle contains basic system instrumentation that appears in the Systems
Insight Manager Property Pages, as well as supporting data collection and reporting by
Systems Insight Manager inventory functionality. To maximize the value of Systems Insight
Manager for properties, inventory, and events, see http://www.hp.com/go/hpsim/providers
for the latest WBEM Services bundle.
2. Ensure the managed system software is installed on HP-UX 11i v2 Update 2. On HP-UX 11i
v3, the listed software's or its equivalences are always installed.
To verify that the minimum required software is installed, log in to the remote system, and run
the following command:
$ swlist –l bundle T1471AA B8465BA OpenSSL
If WBEM Services is not found and your operating system is 0603 11.23 OEUR or later, run
the following command:
swlist –l product HPUXBaseAux.WBEMServices
To verify that the optional providers and System Management Homepage are installed, run
commands such as:
$ swlist –l bundle LVMProvider WBEMP-LAN-00 SysMgmtWeb SysFaultMgmt
OnlineDiag
Installing the required software on an HP-UX system 25