HP Systems Insight Manager 7.3 Update 1 User Guide

Select Quick Setup for HP Insight Remote Support to configure the server settings. Select one of
the following options:
• Select Register this server directly to HP to directly connect a Gen8 server model to HP Insight
Online.
You can enter the HP passport credentials and web proxy settings to directly register a Gen8
server model to the HP Support Center.
◦ HP Passport Username
Enter the passport username that you created in the HP Support Center web portal. The
HP passport username is the HP Support Center login account through which the Gen8
server gets connected to HP Support Center.
IMPORTANT: In most cases, your HP Passport User ID is the same as the email address
that you use to during the HP Passport registration process. If you changed your User ID
in HPSC, ensure that you enter your User ID and not your email address.
◦ HP Passport Password
Enter the password associated with the HP passport username.
◦ Web Proxy Server
Enter the web proxy server hostname or IP address. The web proxy server is the server
through which the Gen8 servers talk to the HP environment.
◦ Web Proxy Port
Enter the port number of the web proxy.
◦ Web Proxy User Name
Enter the username of the web proxy.
◦ Web Proxy Password
Enter the password associated with the web proxy user name.
IMPORTANT: For more information on registering the server on HP Insight Online, see HP
Insight Remote Support and Insight Online Setup Guide for HP ProLiant Gen8Servers and HP
BladeSystem c-ClassEnclosures. After registering the server directly to HP, go to http://
www.hp.com/go/InsightOnline and log in using your HP Passport account to complete the
registration process.
• Select Register this Server through an HP Insight Remote Support centralized Hosting Device
to connect to insight remote support. Enter the Insight RS Hosting Device hostname or IP address
and port number. The default port is 7906.
NOTE: Verify that you have installed and configured Insight RS 7.0.5 or later on a centralized
hosting device.
• Select Unregister this server from Remote Support to disable insight remote support.
If the server is connected to an Insight Remote Support hosting device, log in to the Insight
Remote Support GUI and delete the device, unless you plan to re-register or re-discover it with
the same Insight Remote Support client.
NOTE: Unregistering the server disables the remote support functionality and removes it
from HP Insight Online.
24 Setting up managed systems