HP Systems Insight Manager 5.3 Technical Reference Guide

Related topic

▲ System Page

Discovering storage using SNMP

The HP SIM discovery process for systems running Command View includes the following:

• CV XP on port 80 (http)

• CV VA/SDM on port 4096 (http)

• CV TL on port 4095 (http)

• Discovery of Command View EVA is encapsulated within the discovery of the HP StorageWorks Storage

Management Appliance on ports 2301 or 2381

HP SIM must be permitted to access the web server.

NOTE: To access the links to Command View, select Tools→System Information→System P age→Links.

To configure Command View and SDM:

1. Verify that the HP SIM CMS is within a secure IP range in the Command View server configuration.

• Host based CMS IP address included in .../sanmgr/hostagent/config/access.dat.

• Storage Area Manager management server (if applicable) CMS station IP address included in

/sanmgr/managementserver/config/authorizedClients.dat.

2. Run discovery to discover or re-identify the Command View systems. For more information about running

discovery, see “Discovery and identification”.

3. When discovery is complete, you can group systems in HP SIM and launch Command View from the

System Page. For more information, see “System Page”.

To load the EVA MIB, enter mxmib -a cpqhsv110v3.cfg.

Note: Loading the MIB could take several minutes to complete. For more information about MIBs, see

“Managing MIBs”.

Related procedure

▲ Using HP SIM with SNMP storage solutions