HP Systems Insight Manager 5.3 Technical Reference Guide

4. Sign in to the HP SIM GUI. See “Signing in” for assistance.
5. Add the default WBEM user name and password to the Global Protocol Settings page in the HP SIM
GUI.
Note: An account for at least one of the WBEM user name and password combinations must exist on
each managed system.
Note: You can perform this step once for all managed systems.
a. Select Options→Protocol Settings→Global Protocol Settings.
b. In the Default WBEM settings section, ensure that the Enable WBEM checkbox is selected, and
add the default WBEM user name, password, and confirmation password.
c. Click OK.
Example: Setting up remote Linux systems from a Linux CMS
1. Sign in to the HP SIM on the Linux CMS with full CMS administrative privileges.
2. Run the First Time Wizard. See “Using the First Time Wizard” for more information about running the
First Time Wizard.
3. Run discovery. See “Running a discovery task” for more information.
4. Preconfigure the HP System Management Homepage and version control components. For more
information about preconfiguring the HP SMH component, see System Management Homepage
Installation Guide at http://h18013.www1.hp.com/products/servers/management/agents/
documentation.html and for version control, see HP Version Control Installation Guide at http://
h18013.www1.hp.com/products/servers/management/agents/documentation.html.
5. Install the ProLiant or Integrity Support Packs on remote system. Run the Linux Deployment Utility to install
the latest Integrity Support Pack on Linux and HP-UX systems. For more information, download the HP
ProLiant Support Pack and Deployment Utilities User Guide at http://www.hp.com/servers/psp.
6. Run the Configure or Repair Agents feature. For more information, see Configuring the managed system
software.
HP-UX CMS
Installing the required software on an HP-UX system
Use the following checklist to assist you with setting up managed systems from an HP-UX CMS :
1. Understand the basic managed system software for HP-UX.
For HP-UX, the following software, shown with minimum recommended versions, is required for essential
HP SIM functionality to operate. This software is installed by default as part of the latest HP-UX 11i v2
operating environments, but it might need to be installed or updated on HP-UX 11i v1 or older HP-UX
11i v2 environments.
• T1471AA HP-UX Secure Shell
• B8465BA HP WBEM Services for HP-UX
iCAP properties for cells and processors for a complex is collected and displayed using HP-UX WBEM.
For HP-UX, the following software is required for essential HP SIM functionality to operate. This software
is installed by default as part of the latest HP-UX 11i v3 (11.31), HP- UX 11i v2 (11.23), which can be
installed on HP 9000 or HP Integrity servers, and HP-UX 11i v1 (11.11), which can only be installed
on HP 9000 servers.
▲ B9073BA version 08.01.01 iCAP for HP-UX
NOTE: WBEM providers is only collected under the WBEM.
This WBEM Services bundle contains basic system instrumentation displayed in the HP SIM Property
pages, supporting collection and reporting by HP SIM inventory functionality. To maximize the value
of HP SIM for properties, inventory, and events, see http://www.hp.com/go/hpsim/providers for the
latest WBEM Services bundle.
Setting up managed systems 59