HP Systems Insight Manager 7.0 Installation and Configuration Guide for HP-UX

Table 7 Supported p-Class Servers (continued)
Minimum ProLiant
Support Pack (PSP)
required
Windows
Operating Systems
Supported
1
Minimum Integrated
Lights-Out (iLO) / iLO
2 / iLO 3 / iLO 4
firmware version
required
Minimum BIOS —
System ROM required
Product Models
7.20 or laterWindows and Linux1.70 or laterProLiant BL25p
7.60 or laterWindows and Linux1.24 or later2007.09.23 (A)ProLiant BL25p G2
(4 Dec 2007)
Windows and Linux1.88 or laterProLiant BL25xwp
7.10 or laterWindows and Linux1.70 or later2005.10.27ProLiant BL30p
(21 Jun 2006)
7.20 or laterWindows and Linux1.70 or laterProLiant BL35p
7.10 or laterWindows and Linux1.70 or later2003.07.25ProLiant BL40p
(12 Aug 2003)
7.20 or laterWindows and Linux1.70 or laterProLiant BL45p
7.60 or laterWindows and Linux1.24 or later2007.09.23 (A)ProLiant BL45p G2
(4 Dec 2007)
1
For specific version of the operating systems, browse the ProLiant support matrix at http://h10018.www1.hp.com/
wwsolutions/index.html
Table 8 Supported c-Class Interconnects/Switches
Minimum Software Management firmware versionProduct Models
12.2(25)SEF1Cisco Catalyst Blade Switch 3020 for HP c-Class Blade
System
IP Base IOS firmware package
1
Cisco Catalyst Blade Switch 3120G for HP
IP Base IOS firmware package
1
Cisco Catalyst Blade Switch 3120X for HP
3.3(1a)Cisco MDS 9124e Fabric Switch
1.0.0HP 1:10Gb Ethernet BL-c Switch
NAHP 1Gb Ethernet Pass-Thru Module for HP c-Class
BladeSystem
1.1.0HP 10Gb Ethernet BL-c Switch
1.0.0HP 1/10Gb Ethernet Blade Switch
1.22HP 1/10Gb Virtual Connect Ethernet Module
1.22HP 1/10Gb-F Virtual Connect Ethernet Fiber Module
NAHP 1/10Gb-F VC Module
NAHP 3Gb SAS BL-c Pass-Thru Module
NAHP 4Gb Fiber Channel Pass-Thru Module for c-Class
BladeSystem
1.22HP 4Gb Virtual Connect Fiber Channel Module for c-Class
BladeSystem
2.0.4HP GbE2c Ethernet Blade Switch for HP
2.0.4HP GbE2c Layer 2/3 Ethernet Blade Switch
20 Installation overview and requirements