HP Systems Insight Manager 7.2 Command Line Interface Guide

-A [-n hostname][-p password]
Credentials used for iLO 4 configuration
[-B Trap Destination 1] [-C Trap Destination 2] [-D Trap destination 3]
Setting the iLO embedded SNMP trap destinations
[-J OS Traps <Y|N>]
Enable host operating system traps
[-K RIB Traps <Y|N>]
Enable iLO4-specific hardware traps
[-R SNMP Read Only Community String String 1] [-G SNMP Read Only Community
String 2]
[-H SNMP Read Only Community String 3]
Setting read-only community strings for iLO4 embedded SNMP stack
[-S SNMP < EALERT | PASSTHRU >]
iLO4 Ealert is enabled embedded health and alerting, passthru is to disable
embedded health and alerting, passing SNMP traffic to host
[-T SNMP Trap Commmunity String 1] [-N SNMP Trap Community String 2] [-Q SNMP Trap
Community String 3]
Setting the iLO4 embedded SNMP trap community strings
[-M IRS -U IRS URL -V IRS PORT]
Configure ERS IRS mode
[-M DISABLE]
Disable ERS configuration
-le [-n hostname] [-p password] -u login
List Enmbedded remote support parameters from iLO4
-ls [-n hostname] [-p password] -u login
List the embedded SNMP parameters from iLO4
-la [-n hostname] [-p password] -u login
List all (ERS and SNMP) parameters from iLO4
Return values
MeaningValue
Successful completion.0
Command line syntax error.2
An error occurred during operation.>0
18 Command descriptions