Setting up HP SIM 5.x on an HP-UX Serviceguard Cluster (448492-002, January 2009)

# Uncomment the first line

# (CVM_ACTIVATION_CMD="vxdg -g \$DiskGroup set activation=readonly"),

# and comment out the default, if you want disk groups activated in

# the readonly mode.

# Uncomment the second line

# (CVM_ACTIVATION_CMD="vxdg -g \$DiskGroup set activation=sharedread"),

# and comment out the default, if you want disk groups activated in the

# shared read mode.

# Uncomment the third line

# (CVM_ACTIVATION_CMD="vxdg -g \$DiskGroup set activation=sharedwrite"),

# and comment out the default, if you want disk groups activated in the

# shared write mode.

# CVM_ACTIVATION_CMD="vxdg -g \$DiskGroup set activation=readonly"

# CVM_ACTIVATION_CMD="vxdg -g \$DiskGroup set activation=sharedread"

# CVM_ACTIVATION_CMD="vxdg -g \$DiskGroup set activation=sharedwrite"

CVM_ACTIVATION_CMD="vxdg -g \$DiskGroup set activation=exclusivewrite"

# VOLUME GROUPS

# Specify which volume groups are used by this package. Uncomment

VG[0]=""

# and fill in the name of your first volume group. You must begin with

# VG[0], and increment the list in sequence.

# For example, if this package uses your volume groups vg01 and vg02,

enter:

# VG[0]=vg01

# VG[1]=vg02

# The volume group activation method is defined above. The filesystems

# associated with these volume groups are specified below.

VG[0]="vg01"

# CVM DISK GROUPS

# Specify which cvm disk groups are used by this package. Uncomment

# CVM_DG[0]="" and fill in the name of your first disk group. You must

# begin with CVM_DG[0], and increment the list in sequence.

# For example, if this package uses your disk groups dg01 and dg02,

enter:

# CVM_DG[0]=dg01

# CVM_DG[1]=dg02

# The cvm disk group activation method is defined above. The filesystems

# associated with these volume groups are specified below in the CVM_*

# variables.

#CVM_DG[0]=""

# NOTE: Do not use CVM and VxVM disk group parameters to reference

# devices used by CFS (cluster file system). CFS resources are

# controlled by the Disk Group and Mount Multi-node packages.

# VxVM DISK GROUPS

# Specify which VxVM disk groups are used by this package. Uncomment

# VXVM_DG[0]="" and fill in the name of your first disk group. You must

# begin with VXVM_DG[0], and increment the list in sequence.