HP Systems Insight Manager 5.2 Installation and Configuration Guide for HP-UX

• Discovery Use the wizard to enable discovery, set up the discovery schedule, and enter the IP address
ranges or host names of the systems you want to discover. Discovery is the process HP SIM uses to find
and identify systems on your network and populate the database with that information. A system must
be discovered to collect data and track system health status .
• Configure Managed Systems Configure managed systems as they are discovered, by configuring
WBEM and Windows Management Instrumentation (WMI), SNMP, Secure Shell (SSH) access, and
trust relationship.
• E-mail Enter the e-mail settings that the CMS will use to send e-mail notifications. You can set up
Automatic Event Handling tasks that prompt HP SIM to send e-mails when the CMS receives a specific
event.
• Summary Displays all First Time Wizard settings with the option to modify settings or to finish the
First Time Wizard.
NOTE: The First Time Wizard configures only the basic settings of HP SIM.
Entering WBEM settings
HP Systems Insight Manager (HP SIM) uses the Web-Based Enterprise Management (WBEM) protocol to
communicate with managed systems . You can enterWBEM settings in the First Time Wizard or from the HP
SIM menu bar. To disable WBEM communication or enter settings in the GUI, select Options→Protocol
Settings→Global Protocol Settings from the HP SIM menu.
If you do not have WBEM systems in your network, you do not need to enter information here. If you have
WBEM systems and you do not enter the user names and passwords for these systems, HP SIM will not
discover them.
NOTE: See the HP Systems Insight Manager 5.2 User Guide at http://h18013.www1.hp.com/products/
servers/management/hpsim/infolibrary.html for more information about fine tuning protocol settings for a
single system or a group of similar systems.
To enter WBEM settings using from the First Time Wizard WBEM page:
1. In the User name, Password, and Confirm password fields, enter a default user name and password
as needed. To add additional default user name and password pairs, click Add. To delete user name
and password pairs, click Delete. These defaults apply to all newly discovered systems.
HP recommends limiting WBEM user name and password pairs to 10 to reduce the overall discovery
run time. To add more than 10 WBEM user name and password pairs, run the mxnodesecurity -a
-p wbem -c username : password command for each additional set. You can also create an XML file
that defines your system authorizations before running discovery.
If your network includes storage systems , enter the user name and password of each SMI CIMOM in
this section. For example, if you have an HP host bus adapter (HBA) (Emulex OEM) for Windows, enter
the user name cimadmin and password pwd580. See your storage system's SMI-S provider
documentation for information about the SMI CIMOM user name and password.
The system identification process attempts each user name and password pair until a successful response
is obtained. Future WBEM requests to a system will use the user name and password that succeeded
the system identification process. For Windows-based systems, the user name must include the domain
name, for example, domainname\username .
Enter the user name and password pairs such that root and administrator passwords are listed first and
user and guest passwords are listed second. This order minimizes the search time.
For UNIX, a root password is required for certain providers. The WBEM providers that require root
passwords are:
• FC HBA
• SCSI HBA
Entering WBEM settings 29