HP Systems Insight Manager 5.2 Update 2 Technical Reference Guide

CMS, but you can view the certificate displayed by the browser to ensure its authenticity before signing
in.
9. Sign-in with administrative rights to HP SIM on the target CMS. Select
Options→Security→Certificates→Server Certificate.
10. To create a new server certificate, click New.
11. On the target CMS system, select Start→Settings→Control Panel→Administrative Tools→Services.
12. Restart the HP SIM service.
13. Install the new server certificate on the required managed systems using the Replicate Agent Settings
feature. For more information, see “Using the Replicate Agent Settings feature”.
Migrating certificates when the source CMS has a lower number of trusted certificates
1. Log in to the source CMS system with administrative privileges.
2. Select Options→Security→Certificates→Trusted Certificate.
3. Select a certificate, and then click Export.
4. Save the certificate locally.
5. Repeat steps 2 and 3 for all certificates listed on the Trusted System Certificates page.
6. Copy all exported certificates to the target CMS system.
7. Sign-in with administrative rights to HP SIM on the target CMS.
8. Select Options→Security→Certificates→Trusted Certificate.
9. Click Import.
10. Click Browse, and then select a certificate.
11. Click OK.
12. Repeat steps 9 through 11 for all certificates.
Using the Replicate Agent Settings feature
NOTE: This section assumes agents are already configured to trust the source CMS.
NOTE: This process configures the agents to trust only the new target CMS. If trust for the original source
CMS is still necessary, perform steps 5, 6, and 13 (or 16) using the source CMS.
1. Log in to the System Management Homepage on the target CMS.
2. Select Settings→Security→Trust Mode.
3. Select Trust by Certificate, and then click Save Configuration.
4. Select Settings→Security→Trusted Management Servers.
5. Enter the IP address of the target CMS in the field adjacent to Add Certificate From Ser ver.
6. Click Add Certificate From Server.
7. Sign-in with administrative rights to HP SIM on the source CMS.
8. Select Configure→Replicate Agent Settings.
9. From the Select Target Systems page, select all managed systems that are configured to trust the
source CMS.
10. Click Apply Selections, and then click Next.
11. Select the target CMS as source and click Next.
Note: If the source system does not have HP SIM installed, proceed to step 15.
12. In the source configuration settings page, click System Management
Homepage→Settings→Configuration Options Properties, and then select Trust Mode.
13. Click System Management Homepage→Settings→Trusted Certificate Properties, and then select
Trusted Certificatefor the target CMS.
14. In the source configuration settings page, click HTTP Server→Configuration→Options Properties,
and then select Trust Mode.
15. Click HTTP Server→Trusted Certificates Properties, and select Trusted Certificate for the target
CMS.
16. Click Run Now. The CMS certificates are replicated on the selected managed systems.
176 Networking and security