HP Systems Insight Manager 5.2 Update 2 Technical Reference Guide

The following system types are containers:
• Rack
• Enclosure
• Cluster
When servers and management processors in racks and enclosures are discovered and identified , associations
are made between the systems and the racks and enclosures where systems reside. This association is
displayed in the System Name column on the system table view page by showing name in system type
container name . The following are examples of the different associations available:
• When switches in blade enclosures are discovered and identified, associations are made between the
switches and the enclosures where they reside. This association appears in the System Name column
on the system table view page by showing switch_name in Encl. enclosure_name . The System Type
column displays Switch as the system type. For HP SIM to identify and manage the HP ProLiant p-Class
server blades correctly, HP Insight Management Agent 5.50 or later must be installed on the blades to
make associations work and event correlation function properly. Clicking an enclosure name in the
System Name column displays a list of all discovered systems in the selected enclosure. The status for
both racks and enclosures is always Unknown.
• When a server blade is identified through another system in the same rack or enclosure, associations
are made between the iLO and the enclosures where they reside. This association appears in the
System Name column on the system table view page by showing the system serial number prepended
with Server_ in Encl. enclosure_name . For example, Server_C349KJP5D876 in Encl. Encl4 . The system
address, product name, and operating system are not displayed for these systems.
You can launch HP Serviceguard Manager to manage a server belonging to an HP Serviceguard cluster.
To do so, ensure that:
• HP Serviceguard Manager is installed and registered with HP SIM
• The system selected is an HP-UX or Linux server that belongs to an HP Serviceguard cluster
System Type
This column displays the system type (for example, Server or Desktop). The system type Unmanaged indicates
systems that have no management protocol that HP SIM can detect (for example, no SNMP , WBEM, Desktop
Management Interface (DMI) , or Secure Shell (SSH) ). The system type Unknown indicates systems that have
some management protocol but have not matched any identification rule in HP SIM. See “System types” for
more information about the different system types.
NOTE: Unmanaged systems might indicate that the credentials were not set correctly to communicate with
the system. If you know that there are HP Insight Management Agents installed, verify the credentials used.
System Address
This column displays the primary IP address of the system that HP SIM uses to communicate with the system.
Not all systems have an IP address, including HP Serviceguard clusters.
Product Name
This column displays the product name of the system.
Operating system name
The OS Name column displays the system's operating system on the system. For a Serviceguard cluster, this
column displays HP Serviceguard if the cluster is of type HP-UX, or HP Serviceguard for Linux if the
cluster is of type Linux. HP Serviceguard and HP Serviceguard for Linux under the OS Name column
in the virtual cluster system column do not represent the actual operating system name and type. This field
is used to alert you that the servers that comprise the cluster are of HP-UX or Linux type, respectively.
System table view page 213