HP Systems Insight Manager 5.3 with SP1 Installation and Configuration Guide for Microsoft Windows

For example, you might want to use Trust All if you have a secure network, and everyone
in the network is trusted.
NOTE: You can add up to five subnet IP address/netmask pairs.
NOTE: If you click IP Binding but do not specify the IP address/netmask, then you might
not be able to connect to the HP System Management Homepage.
The IP Restricted Logins window appears. The IP Restricted Logins window enables
you to select specific IP addresses or IP address ranges to include or exclude from gaining
login access. Although optional, the HP System Management Homepage can restrict
login access based on the IP addresses of the machine attempting to gain access.
iii. Select Enable IP Restricted Logins, and click Next. The IP Addresses to Include
window appears. This window enables you to specify the IP address or IP address ranges
to grant login access permission. If there are IP addresses in the Inclusion list, then only
those IP addresses are enabled for login privileges. If there are no IP addresses in the
Inclusion list, then login privileges are permitted to all IP addresses that are not in the
Exclusion list.
NOTE: A single address and ranges of addresses can be accepted in the IP Restricted
Logins window. Enter the single address in the first box.
iv. In the Include field, enter a beginning IP address to which you want to grant login access.
In the To field, enter an ending IP address to which you want to grant login access. All
IP addresses that fall between the beginning and ending IP addresses are granted login
access. Click Add. The IP address or IP address range is added to the Exclusion list. If
necessary, select an IP address or IP address range, and click Delete to remove it from
the Exclusion list. Click Next.
NOTE: If you entered an invalid IP address or IP address range, an error message
appears indicating the IP address is invalid. Click OK. Enter a valid IP address or IP
address range, and click Add again. The IP Addresses to Exclude window appears.
In the Exclude field, enter a beginning IP address to which you want to deny login
access.
v. In theTo field, enter an ending IP address to which you want to deny login access. All
IP addresses that fall between the beginning and ending IP addresses are denied login
access.
vi. Click Add. The IP address or IP address range is added to the Inclusion list. If necessary,
select an IP address or IP address range, and click Delete to remove it from the Inclusion
list. Click Next.
NOTE: If you entered an invalid IP address or IP address range, an error message
appears, indicating the IP address is invalid. Click OK. Enter a valid IP address or IP
address range, and click Add again.
NOTE: If you select Next without adding any IP addresses to the Include or Exclude
lists, a warning message appears, stating, IP Restricted Login checkbox will
be marked as disabled. Do you want to proceed without adding any
IP Address restrictions? If you click OK, the IP Restricted Login option on
the IP Restricted Login window is cleared.
The Summary Panel appears. The Summary Panel lists the location where the HP System
Management Homepage is installed, the amount of space the installation requires, and the summary
of the options that you specified during the installation.
g. Click Next. The installation process is started. Click Finish to exit the wizard.
90 Upgrading HP Systems Insight Manager