HP Systems Insight Manager 7.1 Installation Guide for HP-UX

3 Setting up managed systems
Perform step 2 to install and configure the required management software.
1. Install and configure the CMS. The procedure to complete this step is in the installation chapter
of this guide. For more information, see “Installing HP Systems Insight Manager on the CMS
for the first time” (page 22).
2. Install and configure the required management software on the systems that the CMS will
manage. The procedure to complete this step is in this chapter.
3. Configure HP SIM for your environment. For more information, see “Configuring Systems
Insight Manager” (page 30).
Setting up managed systems involves installing the required management software. The management
software that you must install depends on the type of managed system.
• HP-UX
• Storage systems
• Windows systems see the http://www.hp.com/go/insightmanagement/sim/docs
• Linux - see the http://www.hp.com/go/insightmanagement/sim/docs
Installing the required software on an HP-UX system
Procedure 4 Basic managed system software for HP-UX
1. For HP-UX, the following software, shown with minimum recommended versions, is required
for essential HP SIM functionality to operate. This software is installed by default as part of
the latest HP-UX 11i v2 or HP-UX 11i v3 operating environments, but it might need to be
installed or updated on older HP-UX 11i v2 systems.
• T1471AA HP-UX Secure Shell
• OpenSSL
• HP WBEM Services for HP-UX
This WBEM Services bundle contains basic system instrumentation that appears in the HP SIM
Property Pages, as well as supporting data collection and reporting by HP SIM inventory
functionality. To maximize the value of HP SIM for properties, inventory, and events, see
http://www.hp.com/go/hpsim/providers for the latest WBEM Services bundle.
2. Ensure the managed system software is installed on HP-UX 11i v2 Update 2. On HP-UX 11i
v3, the listed software's or its equivalences are always installed.
To verify that the minimum required software is installed, log in to the remote system, and run
the following command:
$ swlist –l bundle T1471AA B8465BA OpenSSL
If WBEM Services is not found and your operating system is 0603 11.23 OEUR or later, run
the following command:
swlist –l product HPUXBaseAux.WBEMServices
To verify that the optional providers and HP System Management Homepage are installed,
run commands such as:
$ swlist –l bundle LVMProvider WBEMP-LAN-00 SysMgmtWeb SysFaultMgmt
OnlineDiag
Installing the required software on an HP-UX system 27