Getting started with HP SIM 5.3 in a smaller Windows environment (417431-005, January 2008)

For HP SIM on the target systems, this option sets the trust mode to Trust by
Certificate and copies the HP SIM system certificate to the target system trusted
certificate directory. This option enables HP SIM users to connect to the HP SMH
using the certificate for authentication.
You can configure SSO to management processors for Onboard Administrator and
for iLO2. To configure SSO, select Set Trust Relationship. After you configure
SSO, you are not continually prompted to supply the login credentials for the
management processor.
Note: For systems with Management HTTP Server 4.x and earlier, Configure or
Repair Agents adds the Administrator password in the Management HTTP Server
store and modifies the SNMP settings but cannot change trust relationship
information.
• Configure Version Control Agent (VCA). Select this option to configure the
VCA to point to the HP Version Control Repository Manager (VCRM), where the
repository of software and firmware is located, enabling version comparison and
software updates. This option is available only for Windows systems. This section can
be accessed in the Configuration section of all CMS systems including Windows,
Linux and HP-UX.
To configure VCA:
1. In the Select the system where the VCRM is installed field, select the
server where the VCRM is installed from the dropdown list.
2. In the User Name field, enter the user name to access the VCRM. This user
cannot be the default "Administrator" user. It has to be a user with
administrative privileges.
3. In the Password field, enter the password to access the VCRM.
4. In the Confirm Password field, reenter the password for the VCRM just as
you entered it in the Password field.
• Set administrator password for Insight Management Agents version 7.1 or
earlier. Select this option to repair the administrator password on all Insight Management
Agents installed on the target systems as applicable for Windows and Linux systems.
Note: Do not set this option if you have Insight Management Agents 7.2 or later
installed.
Note: If the remote system is running HP-UX, this option is not executed on the
remote system since it is not applicable on HP-UX systems. If only HP-UX target
systems are being configured at this time, you need not set this option.
If this option is selected, you must complete the following steps:
a. In the Password field, enter the new administrator password.
b. In the Confirm Password field, reenter the new administrator password
exactly as you entered it previously.
7. Click Next. The Step 4: Enter credentials page appears. The credentials specified on this
page are for a privileged account on the target system.