HP SIM 5.2 or later Discovery Cases for c-Class BladeSystems in HP BladeSystem Integrated Manager (447725-003, January 2009)

8. Click ToolsÆIntegrated Consoles ÆHP BladeSystem. The following page appears as

shown.

Note that there are no logical nodes created for servers and switches when OA is discovered in this

case. Logical Servers and switches are not the actual servers and switches discovered. The complete

discovery of servers and switches takes place with IP Address or the DNS name of the device.

9. To discover the servers, ILOs & switches, run Automatic discovery with the Server, iLO2, and

Switch with the DNS name or IP Address. After discovering the servers and switches, the

associated servers (iLO2ÆServer, ServerÆEnclosure) and switches (switchesÆEnclosure) will

appear under “All c-Class Enclosures” collection.

Case 2: The discovery/configuration option Discover systems in an

Enclosure when Onboard Administrator is discovered

selected.

The following steps guide you to discover the On-board Administrator for Case 2:

1. Go to OptionsÆDiscovery.