HP Systems Insight Manager 7.2 Installation and Configuration Guide for HP-UX

Table 7 Supported p-Class Servers (continued)
Minimum ProLiant
Support Pack (PSP)
required
Windows
Operating Systems
Supported
1
Minimum Integrated
Lights-Out (iLO) / iLO
2 / iLO 3/ iLO 4
firmware version
required
Minimum BIOS —
System ROM required
Product Models
PSP 8.7Microsoft Windows
Server Red Hat
iLO 3 version 1.05
and OA version 3.10
A20ProLiant BL685c G7
(AMD Opteron 6200)
Enterprise Linux (RHEL)
SUSE Linux Enterprise
Server (SLES) Solaris
VMware Citrix
XenServer
HP Service Pack for
ProLiant 2012.02.0
Microsoft Windows
Server Red Hat
iLO 4 version 1.01 or
later and OA version
3.50
I31 2011/12/21ProLiant BL460c Gen8
Enterprise Linux (RHEL)
SUSE Linux Enterprise
Server (SLES) Oracle
Solaris VMware Citrix
XenServer
1
For specific version of the operating systems, browse the ProLiant support matrix at http://h10018.www1.hp.com/
wwsolutions/index.html
Table 8 Supported c-Class Interconnects/Switches
Minimum Software Management firmware versionProduct Models
12.2(25)SEF1Cisco Catalyst Blade Switch 3020 for HP c-Class Blade
System
IP Base IOS firmware package
1
Cisco Catalyst Blade Switch 3120G for HP
IP Base IOS firmware package
1
Cisco Catalyst Blade Switch 3120X for HP
3.3(1a)Cisco MDS 9124e Fabric Switch
1.0.0HP 1:10Gb Ethernet BL-c Switch
NAHP 1Gb Ethernet Pass-Thru Module for HP c-Class
BladeSystem
1.1.0HP 10Gb Ethernet BL-c Switch
1.0.0HP 1/10Gb Ethernet Blade Switch
1.22HP 1/10Gb Virtual Connect Ethernet Module
1.22HP 1/10Gb-F Virtual Connect Ethernet Fiber Module
NAHP 1/10Gb-F VC Module
NAHP 3Gb SAS BL-c Pass-Thru Module
NAHP 4Gb Fiber Channel Pass-Thru Module for c-Class
BladeSystem
1.22HP 4Gb Virtual Connect Fiber Channel Module for c-Class
BladeSystem
2.0.4HP GbE2c Ethernet Blade Switch for HP
2.0.4HP GbE2c Layer 2/3 Ethernet Blade Switch
2.25HP Virtual Connect Flex-10 10Gb Ethernet Module for
BladeSystem c-Class
NAHP Virtual Connect 8Gb Fibre Channel Module (24-port)
22 Installation overview and requirements