HP TeemTalk Terminal Emulator, version 7.3, User Manual

●
Scroll rate
Factory default: 24
This determines the number of lines that are scrolled when the Jump scroll option above is
selected.
●
80/132 clears screen
Factory default: Checked
This option determines whether or not data is cleared from the display when the number of
columns is changed.
●
Use 80 column font
Factory default: Unchecked
When this option is checked, the font used in 132 column writing mode will be the same as that
used in 80 column mode.
●
Backspace = DEL
Factory default: Unchecked
The setting of this option determines whether or not a backspace command performs a delete.
●
Printed data type
Factory default: All characters
The setting of this option determines the range of character sent to the printer. Select from All
characters, Ascii characters, National only, Multinational + line drawing or National + line
drawing.
●
Print extent
Factory default: Full page
The setting of this option determines the display area that will be printed with a print screen
command. Select either Full page or the Scroll region.
●
Enable bi-directional printing
Factory default: Unchecked
The setting of this option determines whether data from the printer can be transmitted to the host
during print controller mode.
Setup Options
95