HP TeemTalk Terminal Emulator, version 7.3, User Manual

This option specifies the parity mode for each transmitted character. If the number of data bits
specified by Word Length is 8, set this option to None.
Selecting Odd will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up
to an even number, and 0 if the previous 7 bits add up to an odd number.
Selecting Even will cause an eighth bit to be added with a value of 1 if the previous 7 bits add
up to an odd number, and 0 if the previous 7 bits add up to an even number.
Mark parity will set every eighth bit to 1 and Space parity every bit to 0.
●
Stop Bits
Factory default: 1
This specifies the number of stop bits sent for each transmitted character.
●
Flow Control
Factory default: Both
This option specifies the type of flow control used by the line port to communicate readiness to
transmit or receive data from the auxiliary port device.
◦
None
No flow control.
◦
Input
XON/XOFF on received data.
◦
Output
XON/XOFF on transmitted data.
◦
Both
XON/XOFF on transmitted and received data.
◦
Hardware
RTS/CTS hardware flow control.
●
Enable Bidirectional
Factory default: Checked
The setting of this option determines whether data from the auxiliary port device can be
transmitted to the host as well as received from the host through the TeemTalk session.
●
Open at Session Startup
Factory default: Unchecked
Selecting this option will cause the Aux port to be opened as soon as the TeemTalk session is
started.
98 Chapter 12 VT Series Emulation