HP TeemTalk Terminal Emulator, version 7.3, User Manual

User Key Definitions
To define the function of an f-key or equivalent button locally, press the keys Shift + F10 to display the
User Key Definition screen. The screen can be exited by pressing F9.
Default Definitions
While this screen is displayed the f-keys and equivalent buttons have the functions shown by the buttons
at the bottom of the TeemTalk window, so pressing F4 or the Default Values button will cause the
default key and button definitions to be asserted. The default definitions will take effect when the User
Key Definition screen is exited.
Key String Treatment
Each f-key and button definition displayed in the User Key Definition screen consists of two lines. The
first line begins with the f-key number followed by space then a one-character attribute field. This field
will contain either an uppercase L, T or N. These characters indicate the following:
●
L The key string is executed locally.
●
T The key string is transmitted to the host only.
●
N The key string is treated as keyboard-entered data.
The default selection is T for all f-keys. To change this setting, use the Tab or Shift + Tab keys to move
the cursor over the field then press F2 (Next Choice button) or F3 (Previous Choice button) to cycle
through the options until the one required is displayed.
110 Chapter 13 HP 700-92/96 Emulation