HP TeemTalk Terminal Emulator, version 7.3, User Manual

Playback Keystrokes
You can play back the contents of an Fn key as normal or one keystroke at a time. The following
procedure describes normal playback. For one keystroke playback, select Single Step Macros on
the Notice Board Settings tab of the 3270 Display Settings dialog.
1. Position the text cursor where the playback is to start.
2. Press the Play key to enter Play mode.
The status line will display PLAY and a series of boxes representing the Fn keys. A solid box
indicates that the Fn key in that position is currently storing recorded keystrokes.
3. Press the Fn key storing the recorded data to playback.
Playback will begin immediately, as indicated by a P on the status line. All the recorded
keystrokes will be played back automatically. When playback is completed the P will disappear.
If the recorded keystrokes included Pause, then playback will halt at that point to allow you to
enter keystrokes manually. Press Play to resume playback from where you stopped typing.
If you want to cancel during the playback operation, press the Quit key.
Editing Macros
1. Press Alt + F3.
2. Press the Fn key containing the macro to be edited.
The status line will display information about the Fn key macro as follows:
●
Displays EDIT or INSERT depending on the current mode.
●
Number of new keystrokes that may be stored.
●
Current Fn key number.
●
Cursor position within the macro (i.e. the number of keystrokes from the start of the macro).
●
Contents of the macro.
3. Use the Left or Right cursor keys to move the cursor one character position at a time through the
macro, or the Up or Down cursor keys to move 20 character positions at a time.
148 Chapter 15 IBM 3270 Display Emulation