HP TeemTalk Terminal Emulator, version 7.3, User Manual

3. Enter the keystrokes to be recorded.
You may pause recording at any time to allow keystrokes to be entered manually when played
back by pressing Pause. Pause mode is indicated by the following symbols on the status line. To
continue recording, press Pause again.
NOTE: You can cancel the newly recorded keystrokes by pressing the Quit key. This
cancellation does not affect the previously recorded keystrokes.
4. To finish and save the recording, press the Record key.
Playback Keystrokes
1. Position the text cursor where the playback is to start.
2. Press the Play key to enter Play mode.
The status line will display PLAY and a series of boxes representing the Fn keys. A solid box
indicates that the Fn key in that position is currently storing recorded keystrokes.
3. Press the Fn key storing the recorded data to play back.
Playback will begin immediately, as indicated by a P on the status line. All the recorded
keystrokes will be played back automatically. When playback is completed the P will disappear.
If the recorded keystrokes included Pause, then playback will halt at that point to allow you to
enter keystrokes manually. Press Play to resume playback from where you stopped typing.
If you want to cancel during the playback operation, press the Quit key.
Error Codes
The following error codes may appear on the status line if an error occurs during recording or
playback.
9001 Exceeded the maximum number of allowed keystrokes.
Remedy: Press the Record key to exit Record mode. To record a new keystroke sequence, either:
●
Press the Record key and the target Fn key that has erasable data, then enter the new data,
or:
●
Press the Record key and the target Fn key that has erasable data, then press the Delete key
to erase the recorded data for that key.
Record & Playback Keystrokes Facility
181