HP TeemTalk Terminal Emulator, version 7.3, User Manual

●

TeemTalk configuration bar:

●

TeemTalk Session menu:

The Transport setting specifies the physical method by which the host connection is made. TeemTalk

supports four transport protocols for communication with the host:

●

TCP/IP

For host communication using the internet protocol suite TCP (Transport Control Protocol) and IP

(Internet Protocol). See

TCP/IP Transport on page 13.

●

SSH2

A secure shell client/server protocol used to encrypt and transmit data securely over a network,

with authentication provided by a password and/or key. See

SSH2 Transport on page 13.

●

Serial

For host communication requiring data to be sent sequentially, one bit at a time, see

Serial

Transport on page 30.

●

SSL

For host connection using the Secure Sockets Layer protocol to encrypt communications and

validate the host/client. See

SSL Transport on page 26.

The Connection setting specifies the host connection protocol. Currently only Telnet is supported.

TeemTalk also provides an Auto Logon feature which enables you to automate all or part of the host

logon procedure by specifying what is sent to the host in response to prompts displayed on the screen.

See

Auto Logon on page 32.

Introduction