HP TeemTalk Terminal Emulator, version 7.3, User Manual

Table 20-2 Wyse Terminal Status Line Messages
Field 1 Both Indicates the current keyboard mode.
CAPS indicates that Caps Lock is on. Press the Caps Lock key to
toggle the mode on and off.
LOCK indicates that the keyboard is locked. This takes precedence
over the CAPS and NUM messages.
NUM indicates that Num Lock is on. Press the Num Lock key to
toggle the mode on and off.
Field 2 Both Indicates the number of the page that is currently displayed. No
message is displayed when the current page is 0.
Field 3 Both * indicates that Monitor mode is on. In this mode, received codes
are not actioned but displayed as symbolic representations.
Field 4 Both Indicates the current operating mode.
FDX indicates full-duplex mode.
HDX indicates half-duplex mode.
LCL indicates local mode.
BLK indicates block mode.
HBLK indicates half-duplex block mode.
HLD indicates that display update has been suspended. Pressing
the Hold key will toggle display update on and off.
Field 5 Both >AUX indicates that the emulation is in auxiliary print or
transparent print mode.
<AUX indicates that the emulation is in auxiliary receive mode.
=AUX indicates that the emulation is in auxiliary receive mode and
auxiliary print mode.
%AUX indicates that a print screen operation is in progress.
Field 6 Standard rrr-ccc indicates the current row and column position of the cursor.
Field 6 Extended PROT indicates that Protect mode is on.
Field 7 Extended WRPT indicates that Write-protect mode is on when in Protect
mode.
Field 8 Extended INS indicates that Insert mode is on.
222 Chapter 20 Wyse Emulations