HP TeemTalk Terminal Emulator, version 7.3, User Manual

23 Siemens 97801 Emulation
This chapter describes the features of the Siemens 97801 terminal emulation.
Introduction
The Siemens 97801 mode provides compatibility with software designed to drive the Siemens 97801
terminal.
Creating a Siemens 97801 Emulation Session
You can create a session either using the TeemTalk Session Wizard or while TeemTalk is running.
Using the TeemTalk Session Wizard
This section describes how to use the TeemTalk Session Wizard to create an Siemens 97801 emulation
session.
1. To run the TeemTalk Session Wizard from the Start menu, select All Programs > HP > HP
TeemTalk Terminal Emulator > Session Wizard.
2. In the Session Name field, enter a unique name that will identify this session configuration for
future selection.
3. Select the Transport method then click the Configure button to specify settings.
4. Select the Connection type then click the Configure button to specify settings.
5. Select Siemens 97801 in the Emulation list box then click the Configure button to specify
settings. (The options are described in the section
Setup Options on page 261.)
6. Click Next to display the Advanced Options dialog.
7. Click Next to display the Finalization dialog.
8. If you want a shortcut icon for this session to be created on the desktop, click the checkbox
Create icon on desktop for session.
9. Click OK to create the session and exit.
10. To run the session, either double-click on the desktop icon if one was created for the session, or
run TeemTalk, display the File menu and select Open Session. Select the name of the
required .tts session file then click Open.
256 Chapter 23 Siemens 97801 Emulation