HP TeemTalk Terminal Emulator, version 7.3, User Manual

25 Capturing Host Communication
This chapter describes how to capture the communication between the host and the emulator in a file,
then replay it.
Introduction
TeemTalk provides a facility for capturing the communication between the host and the emulation to a
file which you can replay. This is achieved using the Capture File and Replay File options on the
Tools menu.
The default capture state is to capture received host data only, but you can capture both received data
and data sent back to the host by the emulation by using the following command line options:
-debug
Capture data sent by host only.
-debug2way
Capture data sent by both host and emulation.
The default replay state is to the emulation, but you can direct the replay to the host only or to both host
and emulation by using the following command line options:
-replay
Replay directed to emulation only.
-replayhost
Replay directed to host only.
-replayboth
Replay directed to both host and emulation.
Note that you can modify the speed at which the replay is performed by appending a number in the
range 0 to 10 to the command line option, where 0 is fast and 10 is slow. For example: -
replayhost8.
Introduction
269