HP TeemTalk Terminal Emulator, version 7.3, User Manual

When this option is checked, any trailing spaces will be removed before the line is sent to the
printer.
●
Wait for printer to close
Factory default: Unchecked
This option is only available when either the Print to Serial Device or the Print to
LinePrinter Device printer method is selected. When this option is checked, all other processing
will be blocked during printing. Please note that the application will be locked during a close if the
buffers require flushing.
●
Close delay
Factory default: 0 (zero)
Specifies the time (in tenths of a second) to wait before closing. Note that the printer will not be
closed if a new open is requested before time out. The application will be blocked during a close
if the buffers require flushing. Specifying a large value can avoid blocking.
●
Output Character Set
Factory default: Iso Latin-1
The character translation used by the printer.
●
PC Ansi Codepage
Factory default: PC Multinational (437)
The codepage value when the Output Character Set is set to PC Ansi.
Advanced
The following sections describe the options available in the Advanced tab of the Emulation Printer
Settings dialog box. The options available vary depending on the current Printer Method setting in
the Settings tab.
Print to File
The following are the options available when the Printer Method option on the Settings tab is set to
Print to File.
62 Chapter 10 Printing