HP UPD - Driver Configuration Support Guide

When copying the cfm file to the local machine driver directory, the cfm file name must
have the format hpcpuxxx.cfm, where xxx matches the number of the cfg file. For example,
hpcpu130.cfg would be named hpcpu130.cfm.
When using UPD 5.2 or later (excluding 5.4), you can use any file name, as long as it uses
the extension .cfm, and the install.exe is used with the /gcfm option to install the printer. For
example, install /gcfm”c:\temp\duplex.cfm” /n”PrinterName” /sm”HostName”
The driver directory can be found at:
●
32–bit systems-systemroot\system32\spool\drivers\w32x86\3
●
64–bit systems-system\system32\spool\drivers\x64\3
5. Install the driver using the supported method of deployment (see the HP UPD Systems
Administrator Guide).
New features in HP DCU 1.0.0.50
The following are the new features for HP DCU 1.0.0.50:
●
Define device type Color for HP UPD.
●
Job Retention Mode changed to Job Storage Mode. In addition, new help text was added.
●
The Secure Printing selection for the Job Storage Mode now includes the Personal Job and
Stored Job options.
●
Raster compression.
New features in HP DCU 1.0.4.102
The following are the new features for HP DCU 1.0.0.102
●
Add New Media size (L size) support
New features in HP DCU 1.0.4.100
The following are the new features for HP DCU 1.0.0.100:
●
Job Storage Mode, PIN to Print adds setting “Request PIN (while printing)” for every new print
job
8 Chapter 2 HP Driver Configuration Utility ENWW