HP UPD - Driver Configuration Support Guide

1. Open the Create Queue wizard by either right-clicking in the Print Management tree or by
selecting Create Print Queue from the Print Management - Common Tasks task module.
2. Select a device from either a group or the All devices listing. Only one device selection is
possible. Click Next.
3. Select one or more remote hosts using the Select Server screen.
4. Select the driver and preconfiguration if it exists.
5. Enter a name for the queue and supply any necessary share information.
6. Click Confirm.
Edit a print queue
1. In the left navigation pane, click Print Management at the bottom of the screen.
In the Print Management - Print Queues task module, select the print queue and click Edit. The
Edit Print Queue wizard starts and the Select driver page appears.
2. Select the driver:
To display all drivers (not just the ones that are specific to the selected device), click Show all
drivers.
Click Next. The Specify print queue options page appears.
3. If you want to share the printer click Share this printer.
4. Click Next. The Results page appears.
5. Click Done. The Print Management page appears.
Delete a print queue
1. In the left navigation pane, click Print Management at the bottom of the screen.
In the Print Management - Print Queues task module, click Delete. The Delete Print Queue
wizard is started.
2. Select one of the following to delete:
●
Driver associated with the print queue: removes the driver that this queue used.
NOTE: When selecting Driver associated with the print queue, the driver might not
actually be removed; this is due to known problems with Microsoft’s Spooler system.
●
Port associated with the print queue: removes the port that this queue used.
NOTE: When selecting Port associated with the print queue, the port might not actually be
removed; this is due to known problems with Microsoft’s Spooler system.
●
Purge jobs associated with the print queue: removes any queued jobs associated with the
queue.
ENWW Edit a print queue 25