HP UPD - System Administrator's Guide HP UPD 5.6.5

13. How is SNMP utilized in the HP UPD?
The HP UPD’s SNMP stack provides Automatic Configuration between the HP UPD print object and the
HP print device, the Status Notification Popup after a new printer install and FILE-PRINT to HP UPD
printer, and the status message prompt for a manual duplex print job.
GET operations are used by the HP UPD (requestor) and the device (responder) over TCP/IP or DOT4
connections. SET is not utilized by the HP UPD.
The HP UPD SNMP v2 functionality requires that the SNMP community name match between the HP UPD
SNMP stack, the Microsoft SNMP stack, and the print device
SNMP settings must align the Community Name in three places: in the HP UPD printer object, the
Microsoft operating system spooler, and the HP print device.
14. For point and print connected clients, is there SNMP v2 activity initiated from the client?
On the point and print client, settings on the Device Settings tab are greyed out, including UpdateNow.
The client will received automatic configuration settings/changes from the print server, not directly
from the print device.
86 Chapter 7 Use the HP UPD ENWW