HP UPD - System Administrator's Guide HP UPD 5.6.5

4. Modify the settings as necessary.
5. In the Update Policy group box, click Apply (to apply selected options and leave the Properties screen
open) or Done (to apply selected options and close the screen). Until you have clicked Apply or Done,
any settings that have changed are not saved in the MPP.
See the following topics for information about configuring specific properties for a new MPP.
Topics
●
UseMode Settings
●
Default Print settings
●
Color Access settings
●
User Search capabilities
●
Status & Supplies Notification settings
●
Job Accounting
●
Job Delivery
●
Basic MPP settings
●
Update an MPP
UseMode Settings
1. In the UseMode Settings section of the Properties screen, click Configure. The UseMode Settings panel
displays.
2. From the Template menu, select one of the following options from
Table 8-4 UseMode Settings panel–
Template menu options on page 101.
Table 8-4 UseMode Settings panel–Template menu options
Options Description
(None) Select this option to remove all UseMode setting from the selected MPP.
NOTE: Selecting this option prevents the change of any settings.
(Create a new template) Select this option to create a new UseMode template. When you select this option,
all fields can be modified. Name the template in a way that is meaningful to your
organization. You might also determine whether a naming convention exists for
your organization.
HP Default When this option is selected, HP default UseMode values are applied to this MPP.
Existing template name Select a previously defined UseMode template to apply to the selected MPP.
3. In the New template field, enter a name for the new template of UseMode settings.
4. Then, select options to apply to all users assigned to this policy, based on the descriptions in
Table 8-5
UseMode Settings—Properties panel options on page 102.
ENWW Manage the HP UPD using HP MPA 101