HP UPD - System Administrator's Guide HP UPD 5.6.5

5. Pre- install all drivers (such as the printer driver, LEDM driver, DOT4 driver, etc.). After the C:\ prompt,
type: pnputil- a C:\HP Universal Print Driver\<driver version>\*.inf
NOTE: <driver version> should be replaced with the actual driver version. See the example below.
NOTE: For more information on pnputil, refer to Microsoft: www.msdn.microsoft.com/en-us/
library/windows/hardware/ff550419(v=vs.85).aspx
6. Close the cmd line window.
7. Connect the product to the computer using a USB cable.
8. A window displays in the lower right-hand corner that indicates the software is installing.
9. The product will be identified in the Devices and Printers folder.
NOTE: Microsoft uses a ranking process when selecting a driver during a PNP USB install.
If there is a conflict where a different driver may be installed, the RemovePNPDrivers utility can be used to
search for HP plug and play printer driver files in the Windows driver store, and provides an option to remove
these staged printer driver files. Currently installed printers are unaffected by this utility. The
RemovePNPDrivers utility is included with the HP Printer Administrator´s Resource Kit (HP PARK). For more
information on the HP PARK in this document, see
HP Print Administrator's Resource Kit (PARK) on page 203.
Only the default location for staged driver files on Windows (%SYSTEMROOT%\inf) will be searched for driver
files.
166 Appendix A USB connectivity ENWW