HP UPD - System Administrator's Guide HP UPD 5.6.5

D Create multi-layered MPL (graphical) views
Introduction
This section explains how to set up the HP UPD in dynamic mode, with one link titled something like “Browse
for Printers…” as illustrated below. When the users click this link, they are presented with a map or list of the
United States, with links to the various company sites displayed. Click a site link and a progressively more
detailed map displays until a particular building and floor of interest is reached.
NOTE: The examples use a multiple layer list view, with a clickable map for the last layer. Multiple layered
maps can be achieved in the same way as explained in this documentation.
To create this list of links, you need a series of web pages, with the top view page linking to the more detailed
pages, until you finally work your way down to a particular managed printer list graphical view.
In the diagram above, if we were visiting building 2 upper in Boise, you would click first on Boise in the US
map, then building 2, and then finally click Upper to get a graphical view of the available printers. The first
MPL is called “Browse for Printers in the United States” in the above example. This is the name of the MPL in
HP MPA. The users will see the name of this MPL in the HP UPD.
This appendix provides the following sections to create the graphical views:
ENWW Introduction 191