HP UPD - System Administrator's Guide HP UPD 5.6.5

error reporting than the limited print error messages that might be enabled by other port monitors,
such as the LPR port monitor.
The HP UPD Port monitor is used only to provide a print path to UNC paths or shares, send print settings
to a local printer, and send jobs to a defined HTTP location for job tracking.
The LPR port monitor is not currently supported by the HP UPD.
●
Print Processor
The HP print processor (hpcppXXX where XXX is based on the driver version such as hpcppp140 for UPD
5.6.0) provides additional functionality for numerous page manipulation features when compared to
the standard print processor (WinPrint) available with Windows. The HP print processor is used in the
newer HP Unidriv-based drivers, and is one of the essential components in HP driver architecture. The
HP print processor provides functionality such as collation, booklet making, scaling, watermarks, and N-
up ordering of pages.
The HP print processor is the HP tested configuration for the HP UPD. Non-HP print processors are not
supported.
●
Citrix
◦
Microsoft Windows Server 2008 R2
●
Citrix XenApp 6.5
◦
Microsoft Windows Server 2008 64-bit Edition Terminal Services
Citrix XenApp 5.0
Citrix XenApp 6.0
◦
Microsoft Windows Server 2008 Terminal Services
Citrix XenApp 5.0
Citrix XenApp 6.0
◦
Microsoft Windows Server 2003 64-bit Edition Terminal Services
Citrix Presentation Server 4.5
◦
Microsoft Windows Server 2003 Terminal Services
Citrix Presentation Server 4.5
●
Novell (
www.novell.com/iprint)
◦
Novell Open Enterprise Server 2 (Linux)
◦
Netware 6.5 SP8 minimum for full Microsoft Windows Vista, Microsoft Windows 7, and Microsoft
Windows XP support (SP7 if only XP)
◦
Novell iPrint Client 5.4 for Microsoft Windows XP, Microsoft Windows Vista, and Microsoft Windows
7, 32-bit and 64-bit architectures
HP UPD can be used independently of the HP MPA software.
Requirements for HP MPA Software
●
Supported Operating Systems
8 Chapter 2 Software description ENWW