HP UPD - System Administrator's Guide HP UPD 5.6.5

Prepare list of printers, queue and port names and port settings.
To create new queues on a new server or client, make a list of all the printers that are to be connected.
Include the printer IP address or hostname. You might want to also decide on a printer naming convention,
location information, and port name convention if you decide not to use default port naming.
Prepare list of drivers required for printer models.
Once you have a list of all the printers, the next step is to decide what drivers to use. For the most current list
of HP UPD supported products, see the following Web site
www.hp.com/go/upd. For those products that are
not supported by the HP UPD, download the appropriate driver(s) from the manufacture’s Web site.
Print server?
The HP UPD in the Direct IP print mode supports the application of policy in a user by user basis. If this type of
configuration is desired, proceed to
Policy on page 229 section.
If no per-user policy is desired, or if the HP UPD deployment is on a print server, proceed to
Create queues
on page 233.
232 Appendix I HP UPD deployment flowcharts ENWW