HP UPD - System Administrator's Guide HP UPD 5.6.5

HP DCU only settings?
Install.exe setting only?
HP DCU and INSTALL.EXE settings?
The HP DCU is included with the HP Printer Administrators Resource Kit (HP PARK). To download the HP PARK,
go to
www.hp.com/go/upd and click Download software. Click a print driver, verify your language, and then
click your operating system. From the table that lists the HP Printer Administrators Resource Kit, click
Download.
The HP DCU is available for both 32-bit and 64-bit systems, and allows an administrator to pre-configure the
HP UPD before installation. All of the queues created from this pre-configured driver have the same default
settings. The HP UPD INSTALL.EXE utility also offers the administrator a number of configuration options. To
get the list, run install.exe /? However, some of the options that are available from INSTALL.EXE are
not available from HP DCU, and vice versa. Refer to
Table 4-1 Configurable functions and pre-configuration
utilities on page 22 for specific details. If all the options you want are available from HP DCU, you can use
HP DCU to pre-configure the driver and then use INSTALL.EXE, or the Add Printer Wizard, to install the driver
and create print queues. Or you can use INSTALL.EXE alone if it has all the desired options.
Table I-1 HP DCU options
Features Install APW APW cluster HP DCU MPA AD
Alternate driver name Y Y Y
Alternate Job Delivery Y Y
Color Access Control (CAC) Y Y
Bidi enable and disable Y
Duplex Y 1 Y Y Y
Dynamic mode Y
Economode Y 1 Y Y Y
Edgeline Quality Access Control
(QAC)
Y YY
Enable HP MPA or AD policy Y
Grayscale as default 1 Y Y Y
Job tracking Y Y
Private Printing / Job storage Y 1 Y Y Y
Private Print default PIN Y Y Y
Restricted mode, MPL display only Y Y Y
Services Tab Y 1 Y Y Y
SNP options (3) Yg 1 2 Y Y Y
SNP HP Special Offers Program Yg 2 Y Y
SNMP Community Name Yg 2 Y
234 Appendix I HP UPD deployment flowcharts ENWW