HP UPD - System Administrator's Guide HP UPD 5.6.5

Microsoft Windows 7 and Windows Server 2008 R2 installation updated
●
HP UPD now installs in shared isolation mode by default on Microsoft Windows 7 and Windows Server
2008 R2
●
Microsoft Windows 7 support added to INSTALL.EXE for Web Services for Devices (WS4D).
Edgeline printing updated
You can now enable Edgeline device Color Access Control by group membership using the Microsoft Windows
registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
\<print_queue_name>\PrinterDriverData
Create a value “SupportCACGroups” of the type DWORD. Then, set the value to 1 to enable feature support, or
0 to remove feature support.
New features HP UPD v5.1
This section lists the new features for HP UPD v5.1.
●
OS support change
●
New paper size supported
●
Lock PIN Printing
●
Easy Print Quality for Monochrome
●
Retain Settings During Upgrade
●
Manual duplexing enabled for certain, older products
OS support change
Added: Windows 2008 R2
New paper size supported
Hagaki paper size (200 x 148 (mm) and 100 x 148 (mm)) is now supported with HP UPD v5.1.
Lock PIN Printing
If job storage mode is set to require a PIN (/pfpjob=5,6,105,106) then a valid PIN must also be included (/
pfpjpin=<0000 - 9999>). If a valid PIN is not set in the command line when required, INSTALL.EXE will pop-up
the help dialog and stop the installation process. Alternatively, use the Driver Configuration Utility to pre-
configure PIN print settings.
Easy Print Quality for Monochrome
Utilizing print technology from EasyColor (introduced in HP UPD v4.7), the same technology is enabled for
monochrome print providing faster print, smaller print jobs, with improved print quality through enhanced
sharpening and adaptive lighting for documents sent from MS Office applications, JPG and PNG images within
a document.
ENWW New features HP UPD v5.1 249