HP UPD - System Administrator's Guide HP UPD 5.6.5

3. Click Job Separator, under Installable Options, and then select Enabled.
4. Click OK.
At least one feature for Output Bins should be selected to show up on the Output tab. A button displays on
the Finishing tab when the job separator feature is enabled. Click this button to open a dialog box to
configure the separator page. Select the Separator Page Details option in the separator page dialog box to
enable all controls on the dialog box. The default value for Source Is is Automatically Select and for Media
Type the default value is Unspecified. The other four check boxes are unchecked by default.
Once the job separator page feature is enabled, follow these steps to select it.
1. Open the Printers folder, right-click the printer, and select Printing Preferences.
2. Select the Finishing tab.
3. Click the Job Separator button.
HP Web Jetadmin language monitor support
A language monitor is integrated with the HP UPD installation package. When the HP UPD is installed in
traditional mode with USB-connected (and supported) devices, a language monitor is installed. HP Web
Jetadmin is using this language monitor to communicate with the printer in order to be able to display the
printer status for USB connected devices in HP Web Jetadmin. Detailed requirements for supporting PC
connected devices with HP Web Jetadmin can be found in the whitepaper “Discovering PC Connected Devices
in HP Web Jetadmin,” which is available at
www.hp.com/go/wja from the Self Help and Documentation tab.
Eco-Print (Two-sided printing) shortcut
A new printing shortcut named Eco-print (Two-sided printing) is available on the Printing Shortcuts tab
with the HP UPD v4.7. Eco-print (Two-sided printing) allows duplex printing to be enabled by default.
Discontinued options in INSTALL.EXE
Beginning with HP UPD v5.2, several INSTALL.EXE switch options are being phased out. In the first phase of
this change, a warning message is displayed in the install.exe /? help screen advising that some
switches will no longer be supported or tested in the future. Administrators should begin adopting
alternatives using the free tools packaged in the HP Printer Administrators Resource Kit.
The second phase starts with the release of HP UPD v5.3. Several switches are now obsolete and no longer
tested or supported by HP.
The following tables list all of the obsolete switches for changing the default settings.
Table J-1 Discontinued switches and command options
Switch/Command
Option
Definition Alternative
/rml Remove a managed printer list.
●
HP DCU/HP DDU/WJA Configurable: equivalent feature not
available
●
UPD Administrator Template: equivalent feature not
available
●
Manage Printer Administrator: reference SAG section “Using
MPP and MPL xml Files…”
ENWW Discontinued options in INSTALL.EXE 255