HP UPD - System Administrator's Guide HP UPD 5.6.5

5. The Installation Mode dialog box opens. Select Traditional mode and click Install.
NOTE: Only traditional mode queues are supported on print servers. Do not create and share dynamic
mode queues on any print server.
6. Click Add a local printer and then click Next.
7. To add a new port, select Create a new port, select Standard TCP/IP Port in the drop down list, and
then click Next.
8. Deselect Query the printer and automatically select the driver to use, type in the IP address or
hostname, and then click Next.
9. Select the Versioned HP UPD driver from the list and then click Next.
NOTE: HP recommends using the versioned driver on print servers.
10. If an HP UPD is currently installed, select Replace existing driver and then click Next.
11. The Type a printer name dialog box opens. The name specified in the Printer name: field is the name of
the installed printer and displays in the Devices and Printers folder. The default printer name is HP
Universal Printing PCL 6 (v5.x.x) for the first installation. However, this increments to HP Universal
Printing PCL6 (copy1) and so on for subsequent installs. Rename the printer to better identify the
printer, and then click Next.
12. The Printer Sharing dialog box opens. Select Do not share this printer, or enter a Share name: to share
the printer. Click Next.
13. Select or deselect Set as the default printer and if you want to print a test page, click Print a test page.
Once the test page prints, click Finish.
14. The Completing the Add Printer Wizard opens. Click Finish.
15. The Finish dialog box opens. Click Finish.
Method 3: Windows client/server: Use command prompt (INSTALL.EXE with
switches)
At the command prompt, type C:\Folder\install /option, where Folder is the location of the
INSTALL.EXE file, / is a forward slash, and option is the command option. For a list of available command
options, see
Available options when installing by command prompt on page 34. Use the command options
to control the installation and the behavior of the HP UPD after installation.
NOTE: In an enterprise environment, a login script might be used to install the HP UPD on a client.
NOTE: To view a complete list of installer options, type the following at the command prompt:
c:\folder\install /?
For example, to make the installation silent by making it available through an .EXE-based administration tool
(such as SMS), type the following syntax:
C:\folder\install /q /h
The /h switch hides the HP install dialogue.
Or, to install the driver in dynamic mode, type the following:
ENWW Installation methods and environments 33