HP UPD - System Administrator's Guide HP UPD 5.6.5

Table 5-1 Command options (continued)
Command option Definition Description
/sm<port>
Creates a traditional printer instance
bound to a specific <port>. The syntax is:
/sm\\servername\sharename
Or:
/smPrinterHostname
For example: /sm15.65.98.111
NOTE: This option implies that driver is
installed in traditional mode and the /tm
should not be used in combination with
the /sm option.
Use this option to create a statically bound
printer that points to the specified port
(local, TCP/IP, IPX/SPX, Hostname, UNC). If
the port already exists, the existing port is
used. If it does not exist, then a new port is
created. The printer operates as a normal
queue.
NOTE: If the HP Universal Print Driver is
installed in traditional mode, the static
mode printer does not allow the user to
use the universal printing functionality or
change the destination address of the
static mode printer.
/n”Printer Name”
Uses the specified name as the name of
the printer, for example:
/n”HP LaserJet P4515”
This option uses the specified name as the
name of the printer (for example,
HP LaserJet P4515).
This option is helpful when using the
traditional mode (/sm) option, but can be
used for common printing as well.
/ni
Does not perform the printer install, only
processes other install options
Use this option to process the specified
install options without creating a printer in
the Printers folder.
You can then create subsequent instances
of the HP UPD that show only the
configured options that are not queue-
specific.
/nd
Does not set the printer as the default. This option does not change the current
default printer on the client system. By
default, the installer sets the newly
installed or updated common printer as the
default printer.
/dgst Disables the Services tab globally in the
HP UPD for all print queues.
Use this option to completely disable and
hide the Services tab when accessing the
printer property pages.
/snptm=0 Disables the Special Offers program pop–
ups.
/tm
Installs the printer in traditional mode
NOTE: Cannot be used with the /sm
option.
Use this option to force the HP UPD to
install in traditional mode. This routine
launches the Add Printer Wizard, and
prompts the user to select a printer port to
complete the process. Do not use this
option when using the /sm option.
/dm
Installs the printer in dynamic mode Use this option to force the HP UPD to
install in dynamic mode.
/u
Use the existing print driver if it is already
installed
Use this option to remove the dialog box
asking the user to “Use existing driver” or
to “Replace existing driver.” To reduce
installation time, use this option if you
must install several printers using the
same driver.
36 Chapter 5 Install and uninstall the HP UPD ENWW