HP UPD - System Administrator's Guide HP UPD 5.6.5

Dynamic mode installations—The Printer Automatic Configuration happens automatically using the
following methods:
a. Hitting Print.
b. After Enter a Printer Address.
c. Selecting Check Status... of an existing printer.
d. Searching for products on the network subnet.
The configuration is automatically updated each time the client connects to the printer via Dynamic mode
connection.
Command line interface
Starting with HP UPD v4.0, administrators can script the Update Now process from a command line for
traditional mode installations of the HP UPD driver. This applies only to HP UPD traditional mode installation.
The files used and file location required for the configuration entry point are different with the Printer
Automatic Configuration release and are therefore Microsoft platform and HP UPD version specific.
Table 7-3 Platform specific commands for scripting the Update Now process
HP UPD version Platform Example command line
HP UPD v5.6.5 32-bit rundll32
%systemroot%\system32\spool\drivers
\w32x86\3\UPD 5.6.5:
hpmux145.dll,UpdateStaticModePrinter "printer
name here" /q
64-bit rundll32
%systemroot%\system32\spool\drivers \x64\3\UPD
5.6.5: hpmux145.dll,UpdateStaticModePrinter
"printer name here" /q
HP UPD v5.6.1 32-bit rundll32
%systemroot%\system32\spool\drivers
\w32x86\3\UPD 5.6.1:
hpmux141.dll,UpdateStaticModePrinter "printer
name here" /q
64-bit rundll32
%systemroot%\system32\spool\drivers \x64\3\UPD
5.6.1: hpmux141.dll,UpdateStaticModePrinter
"printer name here" /q
HP UPD 5.6.0 32-bit rundll32
%systemroot%\system32\spool\drivers
\w32x86\3\UPD 5.6.0:
hpmux140.dll,UpdateStaticModePrinter "printer
name here" /q
64-bit rundll32
%systemroot%\system32\spool\drivers \x64\3\UPD
5.6.0: hpmux140.dll,UpdateStaticModePrinter
"printer name here" /q
ENWW Use the HP UPD — features (traditional mode and dynamic mode) 69