Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

102 Chapter 5
Installing from the Ignite-UX Server
Network Source Installation
Supported
Workstations:
At Release 11.0, the following 32-bit HP 9000 Workstations are
supported:
Series 700: 712, 715/64, 715/80, 715/100, 715/100XC, 743, 744, 725/100
B-Class: B132L, B160L C-Class: C100, C110, C160, C160L, C180
J-Class: All J-Class systems
Unsupported
Workstations
Workstations not supported are the following:
705, 710, 715/33, 715/50, 715/75, 720, 725/50, 725/75, 730,
735, 755
Workstations not supported due to required 100BaseT driver are the
following:
B132L+, B180L C200, C240
Supported Servers The 32-bit kernel can execute on any Server and Workstation supported
on 11.0, except the V2200 Server. The 64-bit kernel executes only on
certain servers. The V2200 requires the use of the 64-bit kernel. Not all
PA8x00 CPU- equipped systems are supported for 64-bit operation, even
though all PA8x00 CPUs are 64-bit capable.
At Release 11.0, the following HP 9000 Servers are supported:
• 32-Bit Only: D, E, G, H, and I-class, K-class (PA7x00), T500, and
T520.
• 32/64-Bit: K-class (PA8x00), and T600,
• 64-Bit Only: V2200
Updating a cluster server to HP-UX 10.30 or later is not supported. NFS
Diskless functionality is not supported in HP-UX Release 10.30 or later.
Do not update your server to HP-UX Release 11.0 if you intend for that
server to operate as an NFS Diskless server.
The details in the following section are provided for guidance in case you
have a variety of HP systems with different boot-console interfacing, and
in case the client system is not currently running HP-UX.
There is on-line help in the boot interface to guide you, in case you need
to interact with the process. If you need help, type help
boot.