Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

Chapter 5 123

Installing from the Ignite-UX Server

Conﬁguring the Installation

• XNTP

Static Routes Screen

Figure 5-13

If your network is divided into subnets, you will probably need to specify

a gateway system to reach other subnets:

• Destination: The ﬁeld has the word "default" or the IP address of the

destination network.

• Gateway: The IP address of the device connecting your network to the

remote network, or your own IP, if wildcard routing is used.

• Hop Count If your gateway IP is not your system's own IP, this is

usually set to "1". If your gateway IP is the same as your system's,

then the Hop Count is "0".

For more information, see the routing(7) man page.