Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1
Chapter 5 133
Installing from the Ignite-UX Server
Configuring the Installation
3. Indicate whether Media Init is required, by clicking on the selection
box and selecting a choice, as needed.
4. Select Modify to configure changes.
5. Select OK, to leave Advanced Disk Parameters and return to the File
System tab.
Tracks per Cylinder • Select a disk by clicking on its entry in the list displayed.
• Edit the Trks/Cyl field as needed, using the backspace and left/right
arrow keys.
• Select the Modify button, to execute any changes.
• Select OK, to leave this screen and return to the File System tab.
Disk RPM • Select a disk by clicking on its entry in the list displayed.
• Edit the Disk RPM field as needed, using the backspace and left/right
arrow keys.
• Select the Modify button, to execute any changes.
• Select OK, to leave this screen and return to the File System tab.
Media Init • Select a disk by clicking on its entry in the list displayed.
• Select the MediaInit button to open the selection list.
• Select "Yes" or "No". If this is set to "Yes", you will also see the
Interleave field.
• Select the Modify button, to execute any changes.
• Select OK, to leave this screen and return to the File System tab.
For more information, refer to the man pages for the following:
• mkfs_vxfs(1M).
• mkfs_hfs(1M).
• mediainit(1).
Intrlv This field is available if Mediainit is set to "Yes".